Cubo – series, material selection

Hull

Length: 18.5 – 21 metres
Width: 5.5 metres

The hull is produced pursuant to Lloyds Register’s Special Service Craft regulations and has been approved by the Danish Maritime Authority.

The hull is made of ship constructing steel and surface-treated with an advanced two-component painting system that ensures a highly hard-wearing surface.

Mooring of the dwelling is done by mooring holes integrated in the hull and these are strongly built for withstanding every condition.

Dwelling

The dwelling area on the CUBO 105 is approx. 105 square metres distributed in 2 floors. Additionally is a sundeck of 25 square metres and two terraces in the lower deck of 13 and 28 square metres respectively.

Fronting

The fronting is covered with horizontally positioned sinus boards which are easy to maintain. The outer walls are made with 200 millimetre insulation with ventilation beneath the external cladding.

Roofs

The roofs are covered with black tar paper and satisfy the standards of quality and constructions for all-year dwellings.

Windows

The windows are produced in seawater proof aluminium on the outside, which is powder coated and therefore easy to maintain. Inside the windows have wooden frames.

Stairs

The dwelling is installed with straight-way stairs to the 1^st floor.

Internal surfaces

The ceiling is made of gypsum boards. The walls covered with fibre gypsum and felt which is painted. The floor in the lower deck is hardwood.
The bathroom floor is covered with tiles and floor heated