Seasight - WBC 90 - Materials

Materialer - WBC90

Hull:

Length: 18.5 - 21 metres
Width: 5.5 metres

The hull is produced pursuant to Lloyds Register’s Special Service Craft regulations and has been approved by the Danish Maritime Authority.

The hull is made of ship constructing steel and surface-treated with an advanced two-component painting system that ensures a highly hard-wearing surface.

Mooring of the dwelling is done by mooring holes integrated in the hull and these are strongly built for withstanding every condition.

Dwelling:

The living area on the WBC90 is approx. 90 square metres distributed in 2 floors. Additionally is a large sundeck of 30 square metres and to terraces of each 14 square metres on the lower deck.

Fronting:

The dwelling is equipped with a slightly inward inclining fronting covered with larch tree in colours according to clients wish. The outer walls are made with 200 millimetre insulation with 25 millimetre ventilation beneath the external cladding.

Roofs:

The roofs are covered with black tar paper and satisfy the standards of quality and constructions for all-year dwellings. Furthermore, the roofs and storey partition are insulated with 250 millimetres insulation.

Windows :

The windows are made of wood with framework and surface-treated with white wood protection.

Stairs :

The dwelling can be equipped with an exclusive staircase built in steel with solid wooden steps.

External gallery:

The dwelling is installed with an external gallery on the first floor. The gallery has hot galvanized steel railing and is mounted on a solid balk covered with impregnated boards.

Attics etc.:

The dwelling has zinc framed attics, and the board ends are also zinc covered to ensure a long lifetime in the maritime environment.

Internal surfaces:

The floors are made of boards and are “floating”. The bathroom has floor heating and rural mosaic tiles in earth colours. Internal walls are covered with to layer of fire-retarding gypsum boards, gauze and paint. The ceilings are painted boards.